Using the remote control

General information

People or animals left unattended in a Take the remote control with you

People or animals left unattended in a parked vehicle can lock the doors from the inside. Always take the remote control with you when leaving the vehicle so that the vehicle can then be opened from the outside.

Unlocking

The vehicle is unlocked. Press the button.

The vehicle is unlocked.

You can set how the vehicle is to be unlocked.

The setting is stored for the remote control currently in use.

1. "Settings"

2. "Door locks"

3. "Unlock button:"

4. Select the desired function:

4. Select the desired function:

  • "Driver's door only"
    Only the driver's door and the fuel filler flap are unlocked. Pressing again unlocks the entire vehicle.
  • "All doors"
    The entire vehicle is unlocked.

Convenient opening

The remote control can be used to simultaneously open the windows and the glass sunroof*.

the remote Press and hold the button on the remote control.

The windows and the glass sunroof* open.

Releasing the button stops the motion.

Locking

control. Press the button on the remote control.

Do not lock the vehicle from the outside if Do not lock from the outside

Do not lock the vehicle from the outside if there are people in it, as the vehicle cannot be unlocked from inside without special knowledge.

Switching on the interior lamps, courtesy lamps*, and welcome lamps

control Press the button on the remote control with the vehicle locked.

Panic mode*

You can trigger the alarm system if you find yourself in a dangerous situation.

control Press the button on the remote control for at least 3 seconds.

To switch off the alarm: press any button.

Switching on the headlamp courtesy delay feature

remote Briefly press the button on the remote control.

The duration can be set in the Control Display.

Opening the trunk lid

control Press the button on the remote control for approx. 1 second and release.

The trunk lid opens, regardless of whether it was previously locked or unlocked.

During opening, the trunk lid pivots back and up. Ensure that adequate clearance is available before opening.

In some vehicle equipment variants, the trunk lid can only be opened using the remote control if the vehicle was unlocked first.

To avoid locking yourself out of the vehicle, do not place the remote control into the cargo area. The trunk lid is locked again as soon as it is pushed closed.

Confirmation signals from the vehicle

1. "Settings"

2. "Door locks"

3. Deactivate or activate the desired confirmation signals.

  • "Acoustic sig. lock/unlock"
  • "Flash when lock/unlock"

Retrieving the seat, mirror, and

Retrieving the seat, mirror, and steering wheel settings

The driver's seat, exterior mirror, and steering wheel positions selected last are stored for the currently used remote control.

When the vehicle is unlocked, these positions are automatically retrieved if this function was activated.

If this function is used, first make sure that Pinch hazard when moving back the seat

If this function is used, first make sure that the footwell behind the driver's seat is empty. Otherwise, people can be injured or objects damaged when the seat is moved back.

The adjustment procedure is interrupted:

  • When a seat position switch is pressed.
  • When a button of the seat, mirror, and steering wheel memory is pressed briefly.

Activating the setting

1. "Settings"

2. "Door locks"

3. "Last seat position auto."

Malfunction

Malfunction

If the vehicle can no longer be locked or unlocked with the remote control, the battery may be discharged or there may be interference from external sources such as mobile phones, metal objects, overhead power lines, transmission towers, etc.

If this occurs, unlock or lock the vehicle at the door lock using the key.

For US owners only

The transmitter and receiver units comply with part 15 of the FCC/Federal Communication Commission regulations. Operation is governed by the following:

FCC ID:

  • LX8766S.
  • LX8766E.
  • LX8CAS.
  • LX8CAS2.
  • MYTCAS4.

Compliance statement:

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

  • This device may not cause harmful interference, and
  • this device must accept any interference received, including interference that may cause undesired operation.

Any unauthorized modifications or changes to these devices could void the user's authority to operate this equipment.

    See also:

    Strength of the driver's and front passenger airbag
    The strength with which the driver's and front passenger airbags are triggered depends on the position of the driver's and front passenger seats. To maintain the accuracy of this function over ...

    For the 530i, 535i, 550i, 525d, 530d and 535d: check oil level
    The concept The oil level is monitored electronically and displayed on the Control Display. Requirements ▷ The engine must be running and warm after the vehicle has been driven for at lea ...

    Switching on automatically
    Select transmission position R with the engine running. ...