Setting the voice dialog

You can set whether the system should use the standard dialog or a shorter version.

In the shorter variant of the voice dialog, the announcements from the system are issued in an abbreviated form.

On the Control Display:

1. "Settings"
2. "Language/Units"
3. "Speech mode:"
4. Select the setting.

    See also:

    Actions in the event of a flat tire
    Normal tires 1. Identify the damaged tire. Do this by checking the air pressure in all four tires. If the tire inflation pressure in all four tires is correct, the Tire Pressure Monitor may not ...

    Switching on/off
    Press the button. ▷ On: the LED lights up. ▷ Off: the LED goes out. The system can issue warnings at speeds above approx. 30 mph/50 km/h. The state is stored for the remote contro ...

    Engine oil temperature
    Cold engine: the pointer is at the low temperature end. Drive at moderate engine and vehicle speeds. Normal operating temperature: the pointer is in the middle or in the left hal ...