Configuring cell phone
Additional functions can be activated or deactivated for paired and connected mobile phones.
1. "Telephone"
2. "Bluetooth® (phone)"
3. Highlight the mobile phone to be configured.
4. Open "Options".
5. "Configure phone"
6. At least one function must be selected.
► "Telephone"
► "Additional telephone"
► "Audio"
7. "OK"
If a function is assigned to a mobile phone, the function will be deactivated where appropriate for a mobile phone that is already connected and the mobile phone will be unpaired.
See also:
Low tire pressure message
The yellow warning lamp lights up. A
Check Control message is displayed.
There is a flat tire or a major loss in
tire inflation pressure.
The system was not reset after a wheel
change ...
Compact wheel
Safety precautions in the event of a flat tire
or wheel change
Park the vehicle as far as possible from passing
traffic and on solid ground. Switch on the hazard
warning system.
Set the park ...
Display
Display
1. The system is activated.
2. Arrows: at least one lane marking was detected
and warnings can be issued. ...