Pairing/unpairing the mobile phone

General information

The following functions are available:

► Use of a mobile phone as a telephone.
► Use of a mobile phone as an additional telephone.
► Use of a mobile phone as an audio source.
► Use of an audio device as an audio source.

Requirements

► The mobile phone is suitable.
► The mobile phone is ready for operation.
► Bluetooth is activated in the vehicle and on the mobile phone.
► Bluetooth presettings may need to be made on the mobile phone, e.g., for a connection without confirmation or visibility, refer to the mobile phone operating instructions.
► Deactivate Bluetooth audio if necessary.
► A number with at least four and a maximum of 16 digits was defined as the Bluetooth passkey. It is only required once for pairing.
► The ignition is switched on.

See also:

Switching off
The system can be deactivated as follows: ▷ Press the button. ▷ Switch off the ignition. ...

Status indicator on the Control DisplayThe status is displayed.
The tire and system status is indicated by the color of the tires. A change in the tire inflation pressure during driving is taken into account. A correction is only necessary if this is indicat ...

Deactivating HDC
Press the button again and the LED goes out. HDC is automatically deactivated above approx. 37 mph/60 km/h. ...