Avoiding unintentional alarms

The tilt alarm sensor and interior motion sensor can be switched off together, such as in the following situations:

► In automatic car washes.
► In duplex garages.
► During transport on car-carrying trains, at sea or on a trailer.
► When animals are to remain in the vehicle.

Switching off the tilt alarm sensor and interior motion sensor

again Press the remote control button again within 10 seconds as soon as the vehicle is locked.

The indicator lamp lights up for approx. 2 seconds and then continues to flash.

The tilt alarm sensor and interior motion sensor are switched off until the vehicle is locked again.

    See also:

    Message when the system was not reset
    A Check Control message is displayed. The system detected a wheel change but was not reset. Warnings regarding the current tire inflation pressure are not reliable. Check the tire inflation pre ...

    System limits
    The maximum recording range of the camera is 330 ft/100 m. Display The images from both cameras are shown simultaneously on the Control Display. Check the traffic situation as well Check the ...

    Front lamps, bulb replacement
    Halogen headlamps At a glance 1. High beams 2. Parking lamps 3. Low beams 4. Turn signal Parking lamps and roadside parking lamps, lateral turn signal lamp Follow the general instructions o ...