Mounting LATCH child restraint fixing systems

1. Mount the child restraint fixing system; refer to the operating instructions of the system.

2. Ensure that both LATCH anchors are properly connected.

    See also:

    Activating the High-beam Assistant
    1. Turn the light switch to . 2. With the low beams switched on, briefly push the turn indicator lever in the direction of the high beam. Activating the High-beam Assistant The indicator lam ...

    Checking the pressure
    Only check the tire inflation pressure when the tires are cold. This means after driving no more than 1.25 miles/2 km or when the vehicle has been parked for at least 2 hours. When the tires a ...

    Ventilation in rear, center
    ▷ Thumbwheels for adjusting the temperature, arrows 1. Toward blue: colder. Toward red: warmer. ▷ Lever for changing the air flow direction, arrow 2. ▷ Thumbwheels for open ...