Strength of the driver's and front passenger airbag

The strength with which the driver's and front passenger airbags are triggered depends on the position of the driver's and front passenger seats.

To maintain the accuracy of this function over the long-term, calibrate the front seats when a corresponding message appears on the Control Display.

Calibrating the front seats

A corresponding message appears on the Control Display.

1. Move the respective seat forward all the way.
2. Move the respective seat forward again. It moves forward briefly.
3. Readjust the seat to the desired position.

The calibration procedure is completed when the message on the Control Display disappears.

If the message continues to be displayed, repeat the calibration.

If the message does not disappear after a repeat calibration, have the system checked as soon as possible.

Ensure that the area of movement of the Unobstructed area of movement
Ensure that the area of movement of the seats is unobstructed to avoid personal injury or damage to objects.◀

    See also:

    DSC OFF
    Driving stability is limited during acceleration and when driving in bends. Stabilizing interventions by the Integral Active Steering* system are only performed by the rear axle steering. To i ...

    Adding engine oil
    Filler neck When the indicator lights up in the instrument cluster, add 1 US quart/liter of engine oil within the next 125 miles/200 km. Do not add too much engine oil When too much engine o ...

    Determining the load limit
    Determining the load limit 1. Locate the following statement on your vehicle’s placard: ▷ The combined weight of occupants and cargo should never exceed XXX kg or YYY lbs. Otherwise, d ...