Oil types for refilling
Notes
No oil additives
Oil additives may lead to engine damage.
Viscosity grades for engine oils
When selecting an engine oil, ensure that the engine oil belongs to one of the viscosity grades SAE 0W-40, SAE 0W-30, SAE 5W-40, and SAE 5W-30 or malfunctions or engine damage may occur.
The engine oil quality is critical for the life of the engine.
Some types of oils in some cases are not available in all countries.
Approved oil types
Additional information about the approved types of oils can be requested from the service center.
Alternative oil types
If the approved engine oils are not available, up to 1 US quart/liter of an oil with the following specification can be added:
See also:
General information
Danger of burns from hot engine
Do not open the cooling system while the
engine is hot; otherwise, escaping coolant may
cause burns.◀
Suitable additives
Only use suitable additives; o ...
The concept
backup camera, refer to page 112, can be
switched on.
PDC supports you when parking. A slow approach
to an object in front of or behind your vehicle
is announced by:
▷ Signal tones.
...
At a glance
▷ Display the traffic bulletins from radio stations
that broadcast the TI Traffic Information
of a traffic information service. Information
on traffic obstructions and hazards is
updated ...