Message when the system was not reset
A Check Control message is displayed.
The system detected a wheel change but was not reset.
Warnings regarding the current tire inflation pressure are not reliable.
Check the tire inflation pressure and reset the system.
See also:
Programming
▷ LED, arrow 1.
▷ Memory buttons, arrow 2.
Fixed-code hand-held transmitters
1. Switch on the ignition.
2. Initial setup:
Press the two outer memory buttons 1 and
3 for approx. 20 ...
Switching off the engine
Always take the remote control with you when
you leave the vehicle.
When parking, apply the parking brake forcefully; otherwise, the vehicle could
begin to roll.
Manual transmission1. Wit ...
Communications
This chapter describes how to use the telephone, BMW Assist and BMW TeleServices. ...