Pinch protection

If the closing force exceeds a specific value as a window closes, the closing action is interrupted.

The window reopens slightly.

pinch protection Danger of pinching even with pinch protection

Even with the pinch protection system, check that the window's closing path is clear; otherwise, the closing action may not stop in certain situations, e.g., if thin objects are present.

Do not install any accessories in the range No window accessories

Do not install any accessories in the range of movement of the windows; otherwise, the pinch protection system will be impaired.

Closing without the pinch protection system

Monitor the closing process and make Danger of pinching

Monitor the closing process and make sure that the closing path of the window is clear; otherwise, injuries may result.

For example, if there is an external danger or if ice on the windows prevents a window from closing normally, proceed as follows:

1. Pull the switch past the resistance point and hold it there.

Pinch protection is limited and the window reopens slightly if the closing force exceeds a certain value.

2. Pull the switch past the resistance point again within approx. 4 seconds and hold it there.

The window closes without pinch protection.

    See also:

    Indication of a flat tire
    The warning lamp lights up red. A message appears on the Control Display. In addition, a signal sounds. There is a flat tire or a major loss in tire inflation pressure. Reduce your speed and ...

    Illuminated vanity mirror* in the rear
    Folding down Press the button. The vanity mirror folds down. The angle can be adjusted by hand. Folding up Press the mirror up. ...

    Deactivating HDC
    Press the button again and the LED goes out. HDC is automatically deactivated above approx. 37 mph/60 km/h. ...