Activating the voice activation system
1.
Press the button on the steering
wheel.
2. Wait for the signal.
3. Say the command.
The command is displayed in the instrument cluster.
This symbol in the instrument cluster indicates
that the voice activation system is active.
If no other commands are available, operate the function in this case via iDrive.
See also:
Initialization
The initialization process adopts the set inflation
tire pressures as reference values for the detection
of a flat tire. Initialization is started by confirming
the inflation pressures.
Do not ...
Charging the battery
In the vehicle, only charge the battery via the
terminals in the engine compartment, with the engine switched off. ...
Increasing or decreasing vehicle speed
Specify desired speed in the range from approx.
4 mph/6 km/h to approx. 15 mph/25 km/h using
the rocker switch of the cruise control on the
steering wheel. Vehicle speed can be changed
by light ...