Starting aid terminals

Connect the jumper cables in the correct Connecting order
Connect the jumper cables in the correct order; otherwise, there is the danger of injury from sparking.◀

The so-called starting aid terminal in the engine

The so-called starting aid terminal in the engine compartment acts as the battery's positive terminal.

Fold open the cover. To do so, pull the tab.

The body ground or a special nut acts as the

The body ground or a special nut acts as the negative terminal.

    See also:

    Switching off automatically
    The system switches off and the LED goes out: After approx. 33 ft/10 m when driving forward. Above approx. 9 mph/15 km/h when driving forward. Switch on the system again if necessary. ...

    Tow fitting
    The screw-in tow fitting should always be carried in the vehicle. It can be screwed in at the front or rear of the BMW. It is located in the container on the inside of the trunk lid. Tow fit ...

    Observe the following when refueling
    The fuel tank is full when the filler nozzle clicks off the first time. Handling fuels Obey safety regulations posted at the gas station. ...