Configuring the devices

Additional functions can be activated or deactivated for paired and connected devices.

1. "Telephone"

2. "Bluetooth® (phone)"

3. Highlight the device to be configured.

4. Open "Options".

5. "Configure phone"

6. At least one function must be selected.

▷ "Telephone"
▷ "Additional telephone"
▷ "Audio"

7. "OK" If a function has already been assigned to another connected device, the function is deactivated in that device and the device is unpaired when the function is assigned to a new device.

    See also:

    Flat Tire Monitor FTM
    The conceptThe system does not measure the actual inflation pressure in the tires. The system detects a pressure loss in a tire by comparing the rotational speeds of the individual wheels while mov ...

    Activating the High-beam Assistant
    1. Turn the light switch to . 2. With the low beams switched on, briefly push the turn indicator lever in the direction of the high beam. Activating the High-beam Assistant The indicator lam ...

    Headlamp courtesy delay feature
    The low beams stay lit for a short while after the ignition is switched off, if the lamps are switched off and the headlamp flasher is switched on. Setting the duration 1. "Settings" ...