AUTO program

Air volume, air distribution, and Press the button.

Air volume, air distribution, and temperature are controlled automatically.

Depending on the selected temperature, AUTO intensity, and outside influences, the air is directed to the windshield, side windows, upper body, and into the footwell.

The cooling function is switched on automatically with the AUTO program.

At the same time, a condensation sensor controls the program in such a way that window condensation is prevented as much as possible.

To switch off the program: press the button again or manually adjust the air distribution.

Intensity of the AUTO program

Pressing the AUTO button repeatedly adjusts the intensity of the AUTO program. The selected intensity, SOFT, MEDIUM or INTENSIVE, appears on the display of the automatic climate control.

    See also:

    Storing
    1. Switch on the ignition. 2. Set the desired position. 3. Press the button. The LED in the button lights up. 4. Press the desired button 1 or 2. The LED goes out. If the M button is pressed ...

    Actions in the event of a flat tire
    Run-flat tires You can continue driving with a damaged tire at speeds up to 50 mph/80 km/h. Do not continue driving without run-flat tires If the vehicle is not equipped with run-flat tires ...

    Volume of spoken instructions
    Turn the volume button while giving an instruction until the desired volume is set. The setting is stored for the remote control currently in use. ...