Message when the system was not reset
The yellow warning
lamp lights up. A
message appears on the Control Display.
The system detected a wheel change but was not reset.
Warnings regarding the current tire inflation pressure are not reliable.
Check the tire inflation pressure and reset the system.
See also:
Switching the high beams on and off manually
Switching the high beams on and off manually
▷ High beams on, arrow 1.
▷ High beams off/headlamp flasher, arrow 2.
To reactivate the High-beam Assistant, briefly
push the tu ...
Increasing or reducing speed
The speed can be changed in the range from
approx. 4 mph/6 km/h to approx. 15 mph/25 km/
h by pressing the accelerator or brake pedal
lightly.
A target speed within the same range can be
spec ...
Navigation
This chapter contains various examples of how
the navigation system can guide you reliably to
your destination. ...