Cleaning the windshield and headlamps
Pull the lever, arrow 4.
The system sprays washer fluid on the windshield and activates the wipers briefly.
When the vehicle lighting system is switched on, the headlamps are cleaned at regular and appropriate intervals.
Do not use the washer system at freezing
temperatures
Do not use the washers if there is any danger
that the fluid will freeze on the windshield; otherwise,
your vision could be obscured. For this
reason, use antifreeze.
Avoid using the washer when the reservoir is empty; otherwise, you could damage the pump.◀
See also:
Switching the high beams on and off
manually
High beams on, arrow 1.
High beams off/headlamp flasher, arrow 2.
To reactivate the High-beam Assistant, press
the button on the turn signal lever. ...
Notes
Replacing fuses
Never attempt to repair a blown fuse and
do not replace a defective fuse with a substitute
of another color or amperage rating; this could
lead to a circuit overload, ultimatel ...
Starting the engine
Never use spray fluids to start the engine.
1. Start the engine of the assisting vehicle and
let it run for several minutes at an increased
idle speed.
2. Start the engine of the vehicle being s ...