Calling up settings

driving Do not retrieve the memory setting while driving
Do not retrieve the memory setting while driving, as an unexpected seat movement could result in an accident.◀

Comfort function

1. Open the driver's door after unlocking or switch on the radio ready state.

2. Briefly press the desired memory button 1 or 2.

The seat is automatically moved to the stored position.

The procedure stops when a switch for setting the seat or one of the memory buttons is pressed.

Safety mode

1. Close the driver's door and switch the ignition on or off.

2. Press and hold the desired memory button 1 or 2 until the setting procedure is completed.

    See also:

    Towing methods when towing other vehicles
    Tow bar The tow fittings used should be on the same side on both vehicles. Should it prove impossible to avoid mounting the tow bar at an offset angle, please observe the following: ▷ C ...

    Switch off the engine during longer stops
    Switch off the engine during longer stops, e.g., at traffic lights, railroad crossings or in traffic congestion. Fuel savings are achieved after the vehicle is switched off for only approx. 4 s ...

    Increasing or decreasing vehicle speed
    You can specify your desired speed in the range from approx. 4 mph/6 km/h to approx. 15 mph/ 25 km/h using the rocker switch of the cruise control on the steering wheel. You can change the veh ...