Using voice activation
Activating the voice activation system
1. 
Press the button on the
steering
wheel.
2. Wait for the signal.
3. Say the command.
The command appears on the Control Display.
The symbol on the Control
Display indicates
that the voice activation system is active.
If no other commands are available, continue operating the function via iDrive.
Terminating the voice activation system
Briefly press the button on the steering wheel or ›Cancel‹.
See also:
Programmable memory
buttons
General information
The Owner's Manual can be stored on the programmable
memory buttons and called up directly.
Storing
1. Select "Owner's Manual" via the iDrive.
2. Press the desire ...
Issued warning
If you leave the lane and if a lane marking has
been detected, the steering wheel begins vibrating.
If the turn signal is set before changing the lane,
a warning is not issued.
End of warning
T ...
Increasing or reducing speed
The speed can be changed in the range from
approx. 4 mph/6 km/h to approx. 15 mph/25 km/
h by pressing the accelerator or brake pedal
lightly.
A target speed within the same range can be
spec ...