Wiper blade replacement

General information

without wiper Do not fold down the wipers without wiper blades

Do not fold down the wipers if wiper blades have not been installed; this may damage the windshield.

Replacing the wiper blades

1. To change the wiper blades, fold up, the wiper arms.

2. Fold up and hold the wiper arm firmly.

3. Squeeze the retainer spring, arrow 1, and fold up the wiper blade, arrow 2.

4. Remove the wiper blade forward from the

4. Remove the wiper blade forward from the catch.

5. Insert the new wiper blade in reverse order of removal until it locks in place.

Before opening the hood, ensure that the Risk of damage

Before opening the hood, ensure that the wiper arms with the wiper blades are against the windshield to prevent damage.

    See also:

    Following the initial pairing
    ▷ The mobile phone is detected/connected in the vehicle within a short period of time when the engine is running or the ignition is switched on. ▷ The phone book entries of the tele ...

    Washer fluid reservoir
    Adding washer fluid Only add washer fluid when the engine is cool, and then close the cover completely to avoid contact between the washer fluid and hot engine parts. Otherwise, there is the ...

    Rotating wheels between axles
    The manufacturer of your vehicle advises against swapping wheels between the front and rear axles. This can impair the handling characteristics. Rotating the tires is not permissible when using ...