Fold-out position of the wipers

Required when changing the wiper blades or under frosty conditions, for example.

1. Switch off the ignition.

2. Under frosty conditions, ensure that the wiper blades are not frozen onto the windshield.

3. Press the wiper lever up beyond the point of resistance and hold it for approx. 3 seconds, until the wiper remains in a nearly vertical position.

After the wipers are folded back down, the wiper system must be reactivated.

Fold the wipers back down Fold the wipers back down

Before switching the ignition on, fold the wipers back down to the windshield; otherwise, the wipers may become damaged when they are switched on.

1. Switch on the ignition.

2. Press the wiper levers down. The wipers move to their resting position and are ready for operation.

    See also:

    Child restraint fixing systems with a tether strap
    Mounting points Mounting points Depending on the vehicle equipment, there are two outer or three mounting points for child restraint fixing systems with a tether strap. LATCH mounting eyes&l ...

    Removing and inserting
    Cargo cover without partition net: Removing The cover can be removed to load bulky luggage. Reach under the cover and turn it upward, arrows. Pull the cover back horizontally. Cargo cover ...

    Operating from the outside
    ▷ Via the remote control. ▷ Via the door handles of the driver's and front passenger doors. The following takes place simultaneously when locking/unlocking the vehicle via the remote ...