Mounting LATCH child restraint fixing systems

1. Mount the child restraint fixing system; refer to the operating instructions of the system.

2. Ensure that both LATCH anchors are properly connected.

    See also:

    Connecting jumper cables
    1. Fold open the cover of the BMW starting-aid terminal. To do so, pull the tab. 2. Attach one terminal clamp of the positive jumper cable to the positive terminal of the battery, or to the cor ...

    The concept
    The parking brake is primarily intended to prevent the vehicle from rolling while parked; it brakes the rear wheels. The parking brake can be set manually or automatically: ▷ Manual: by pu ...

    Preparation
    1. Check whether the battery of the other vehicle has a voltage of 12 volts and approximately the same capacitance in Ah. This information can be found on the battery. 2. Switch off the engine ...