BMW X6: cargo cover

BMW X6: cargo cover
Deploy cargo cover by pulling back.
Do not deposit heavy objects
Do not deposit heavy or hard objects on
the cargo cover. Otherwise, they may present a
danger to occupants, for instance during braking
and evasive maneuvers.◀
Removing

Removing
1. Grasp retracted cargo cover underneath the upper fold on both sides.
2. Pull the cover back out of the side brackets.
3. Depending on your vehicle's equipment package, you can store the cover under the floor panel in the cargo area.

Installing
When installing, proceed in the opposite order of removal.
1. Set the cargo cover into place on the left and right sides.
2. Lift the back of the cover slightly and slide forward until it snaps into the two side brackets.
See also:
Vehicle equipment
All standard, country-specific and optional
equipment that is offered in the model series is
described in this chapter. Therefore, equipment
is also described that is not available in a vehicle, ...
Increasing desired speed
Repeatedly press the lever to the resistance
point or beyond, arrow 1, until the desired speed
is reached.
▷ Each time the lever is pressed to the point of
resistance, the desired speed i ...
Headlamp courtesy delay feature
The low beams stay lit for a short while if the
headlamp flasher is switched on after the ignition
is switched off.
Setting the duration
1. "Settings"
2. "Lighting"
3. &quo ...
