Interrupting the system
Interrupting the system
Press the lever up or down and additionally depress the brake if the vehicle is stationary. The mark in the speedometer changes color and the distance indicator goes out.
In addition, the system is interrupted:
▷ When the brakes are applied.
▷ When the transmission position D is disengaged.
▷ When DTC is activated or DSC is deactivated.
▷ When DSC is activated
▷ When the safety belt and the driver's door
are opened while the vehicle is stationary.
▷ When the system has not detected objects
for an extended period, e.g., on a road with
very little traffic without road edge line markings<>.
▷ The radar sensor is dirty.
Active intervention if the system is interrupted
If the system is interrupted, actively intervene by
braking and, if necessary, with evasive maneuvers;
otherwise, there is the danger of an accident
occurring.◀
See also:
AUTO program
Press the button.
Air volume, air distribution, and
temperature are controlled automatically.
Depending on the selected temperature, AUTO
intensity, and outside influences, the air is directed ...
Notes
Do not cover lower screen edge, since this
is where the sensors and the infrared interface
are installed.
When loading the rear seats and adjusting
the backrest of the front seat, fold i ...
Entering an address using a command
1. Press the
button on the steering
wheel.
2. Enter address
3. Wait for a request from the system.
4. Say the address in the suggested order.
5. Continue making the entry as prompted by
the ...