Setting manually
Setting manually
Pull the button. The parking brake is set.
The indicator lamp lights up in
red. The
parking brake is set.
Indicator lamp in Canadian
modelsTo set the parking brake, the remote control
does not need to be in the ignition lock.
Set the parking brake and further secure
the vehicle as required
Set the parking brake firmly when parking; otherwise,
the vehicle could roll. On steep upward
and downward inclines, further secure the vehicle,
for example, by turning the steering wheel in
the direction of the curb.◀
While driving
Use while driving:
Pull the switch and hold it. The vehicle brakes hard while the button is being pulled.
The indicator lamp lights up in
red, a signal
sounds and the brake lamps light up.
Indicator lamp in Canadian
models.
If the vehicle is braked to a speed of approx.
2 mph/3 km/h, the parking brake remains set.
See also:
Navigation system
General information
The navigation system can determine the precise
position of the vehicle, with the aid of satellites
and vehicle sensors, and can reliably
guide you to every entered destinat ...
Snap-in adapter
The snap-in adapter is used to:
▷ Hold the mobile phone.
▷ Recharge the battery.
▷ Connect the mobile phone to an outside antenna
of the vehicle.
This provides for better netwo ...
Camera
Rain, dirt, snow, or ice can impair camera operation.
The camera is automatically heated when the
external temperatures are low.
The camera is automatically cleaned together
with the headlamps ...