Fuses
Never attempt to repair a blown fuse and do
not replace a defective fuse with a substitute of another color or amperage rating;
otherwise, this could lead to a circuit overload, ultimately resulting in a fire
in the vehicle.
Accessing the fuse box:
1. Open the glove compartment.
2. Remove the damper, arrow 1, from the lower holder by applying forward
pressure.
3. Disengage the glove compartment by pressing on both tabs, arrows 2,
and fold it down.
Plastic tweezers are located on the distributor box.
Information on fuse assignment can be found next to the distributor box.
Spare fuses are available from your BMW center.
After replacing a fuse, press the glove compartment upward until it engages and reattach the damper.
See also:
Display on the Control Display
Switching on the backup camera via
iDrive
With PDC activated:
"Rear view camera"
The backup camera image is displayed. The setting
is stored for the remote control currently in
use ...
Tow fitting
Tow fitting
The screw-in tow fitting should always be carried
in the vehicle. It can be screwed in at the
front or rear of the BMW. It is in the onboard vehicle
tool kit located in a storage ...
The concept
Dynamic Performance Control optimizes the
handling characteristics of your vehicle when
starting off, cornering, and during evasive maneuvers.
To achieve this, the system variably distributes
t ...