What to do if …

What to do if…

> The current position cannot be displayed?

The position is in an unrecognized region, in a poor reception area, or the system is in the process of determining the position. Reception is generally available when you are in the open.

> The destination guidance does not accept a destination without a street name?

A downtown area cannot be determined for the town or city that has been entered. Input any street in the selected town/city and start destination guidance.

> The destination guidance does not accept a destination?

The destination data is not contained in the navigation data. Choose a destination as close as possible to the original one.

> The letters for a destination cannot be selected during destination entry?

The stored data do not contain the data of the destination. Select a destination that is as close as possible to the original.

> The map view is displayed in grayscale? "Traffic conditions/gray map" active: the Control Display changes to a grayscale display. This enables a better view of the traffic bulletins.
> Voice instructions are no longer issued before intersections during destination guidance?

The area has not been fully recorded yet, or you have left the recommended route and the system requires a few seconds to calculate a new route suggestion.

    See also:

    Flat Tire Monitor FTM
    The conceptThe system does not measure the actual inflation pressure in the tires. The system detects a pressure loss in a tire by comparing the rotational speeds of the individual wheels while mov ...

    Configuring the warning time
    After the warning function is switched on, the warning time can be set via the iDrive. For a late warning time, prewarning is deactivated. These settings have no effect on the time of the warni ...

    Pedestrian detection
    The pedestrian detection and warning system only operates in darkness and only when a heat image is displayed. Warm objects that are similar in shape to human beings are detected by the syste ...