For X3 xDrive28i: Oil levelcheck
The concept
The oil level is monitored electronically during driving and shown on the Control Display.
If the oil level reaches the minimum level, a check control message is displayed.
Displaying the oil level
1. "Vehicle Info"
2. "Vehicle status"
3. 
"Engine oil level"
Possible messages
► "Engine oil level OK"
► "Engine oil at minimum. Add 1 quart of
engine oil "
When the display appears in the instrument cluster, add 1 US quart/liter of oil within the next 125 miles/200 km.
► "Engine oil level below minimum. Add 1 quart " Immediately add 1 US quart/liter of oil.
Detailed measurement
Requirements:
► Vehicle is on a level road and the engine is
running at operating temperature.
► Automatic transmission: Selector lever in
transmission position N or P and gas pedal
not depressed.
In order to perform a detailed measurement of the engine oil level:
1. "Vehicle Info"
2. "Vehicle status"
3. 
"Measure engine oil level"
4. "Start measurement"
The oil level is checked and displayed via a scale.
During the detailed measurement, the idle speed is increased somewhat.
Duration: approx. 1 minute.
See also:
Using this Owner's Manual
The fastest way to find information on a particular
topic is by using the index.
An initial overview of the vehicle is provided in
the first chapter.
Updates made after the editorial
deadline
...
Maximum cooling
Press the button.
The system is set to the lowest temperature,
maximum air volume and recirculatedair
mode.
Air flows out of the vents for the upper body region.
Open them for this purpose.
...
Emergency detection of remote control
It is possible to switch on the ignition or start the
engine in situations such as the following:
▷ Interference of radio transmission to remote
control by external sources.
▷ Discha ...