Parking lamps/low beams,headlamp control
General information
Switch position: 0,
,
If the driver door is opened with the ignition switched off, the exterior lighting is automatically switched off at these switch settings.
Parking lamps
Switch position 
: the vehicle
lamps light
up on all sides, e.g., for parking.
Do not use the parking lamps for extended periods; otherwise, the battery may become discharged and it would then be impossible to start the engine.
When parking, it is preferable to switch on the one-sided roadside parking lamps, refer to page 86.
Low beams
Switch position 
with the ignition
switched
on: the low beams light up.
See also:
Tire tread
Summer tires
Do not drive with a tire tread depth of less than
0.12 in/3 mm.
There is an increased danger of hydroplaning if
the tread depth is less than 0.12 in/3 mm.
Winter tires
Do not driv ...
Time
The time is displayed in the
instrument
cluster.
Setting the time on the Control
Display. ...
Display
Night Vision with pedestrian detection is not
available on the rear screen.
Adjustments via the iDrive
With Night Vision switched on:
1. Activate Night Vision with pedestrian detection.
2. Press ...