Setting
Pull the switch.
The LED lights up.
The indicator lamp lights up red.
The
parking brake is set.
Lower lamp: indicator lamp in
Canadian
models
Set the parking brake and further secure
the vehicle as required
Set the parking brake firmly when parking; otherwise,
the vehicle could roll. On steep upward
and downward inclines, further secure the vehicle,
for example, by turning the steering wheel in
the direction of the curb. ◄
While driving
Use while driving serves as an emergency braking function:
Pull the switch and hold it. The vehicle brakes hard while the button is being pulled.
The indicator lamp lights up red,
a signal
sounds and the brake lamps light up.
Lower lamp: indicator lamp in
Canadian
models.
If the vehicle is braked to a speed of approx. 2 mph/3 km/h, the parking brake remains set.
See also:
Activating
Activating
The High-beam Assistant can be activated
when the low beams are switched on.
1. Turn the light switch to or
.
2. Press the button on the turn signal lever, arrow.
The indicator ...
Switching the system on/off
Press the left or right side of the button
on the CD/DVD player in the rear for the
respective page.
Rear entertainment and screens are switched
on/off.
After switching off the ignition, ...
Notes
Your vehicle is equipped with run-flat tires,as standard
equipment
They do not need to be replaced immediately in
the event of a puncture.
When mounting new tires or changing from
summer to wi ...
