Initializing after a power failure

After a power failure during the opening or closing process, the roof can only be operated to a limited extent.

Initializing the system

The system can be initialized when the vehicle is stationary and the engine is running.

During the initialization, the roof closes without pinch protection.

Monitor the closing process and make Danger of pinching
Monitor the closing process and make sure that the closing path of the glass sunroof is clear; otherwise, injuries may result.◄

until the initialization is complete: Press the switch up and hold it until the initialization is complete:

► Initialization begins within 15 seconds and is completed when the sunroof and sliding visor are completely closed.

► The roof closes without pinch protection.

    See also:

    Turn signal, high beams,headlamp flasher
    Turn signal Using turn signals Press the lever beyond the resistance point. To switch off manually, press the lever to the resistance point. Unusually rapid flashing of the indicator lamp i ...

    Date
    The date is displayed in the instrument cluster. Setting the date and date format. ...

    Unpairing a device
    1. "Telephone" 2. "Bluetooth® (phone)" 3. Highlight the device that is to be unpaired. 4. Open "Options". 5. "Remove phone from list" Unpairing a device ...