Signal tones
When approaching an object, an intermittent tone is sounded that indicates the position of the object. For example, if an object is detected to the left rear of the vehicle, a signal tone sounds from the left rear speaker.
The shorter the distance to the object becomes, the shorter the intervals.
If the distance to a detected object is less than approx. 12 in/30 cm, a continuous tone is sounded.
If objects are located both in front of and behind the vehicle, an alternating continuous signal is sounded.
The intermittent tone is interrupted after approx.
3 seconds:
▷ If the vehicle stops in front of an object that is detected by only one of the corner sensors.
▷ If moving parallel to a wall.
The signal tone is switched off:
▷ When the vehicle moves away from an object by more than approx. 4 in/10 cm.
▷ When transmission position P is engaged.
Volume
You can set the volume of the PDC signal tone.
The setting is stored for the remote control currently in use.
See also:
Requests
Do not use the voice activation system to initiate an Emergency Request. In stressful
situations, the voice and vocal pitch can change. This can unnecessarily delay the
establishment of a telephon ...
Brake assistant
When you apply the brakes rapidly, this system
automatically produces the maximum braking
force boost. It thus helps to achieve the shortest
possible braking distance during full braking.
This ...
Malfunction
In the event of a malfunction, the steering wheel
must be turned further, while the vehicle responds
more sensitively to steering wheel
movements in the higher speed range.
The stability-enhanc ...