Switching on/off and interrupting cruise control
Switching on
Press the button on the steering wheel.
The indicator lamps in the instrument cluster light up and the mark in the speedometer is set to the current speed.
Cruise control can be used.
Switching off
Deactivated or interrupted system
If the system is deactivated or interrupted, actively intervene by braking and, if necessary, with evasive maneuvers; otherwise, there is the danger of an accident occurring.
If switching off the system while stationary, press on the brake pedal at the same time.
Press the button.
▷ If active: press twice.
▷ If interrupted: press once.
The displays go out. The stored desired speed and distance are deleted.
Interrupting
When active, press the button.
If interrupting the system while stationary, press on the brake pedal at the same time.
The system is automatically interrupted if:
▷ The brakes are applied.
▷ Transmission position D is disengaged.
▷ DTC Dynamic Traction Control is activated or DSC is deactivated.
▷ DSC is actively controlling stability.
▷ The safety belt and the driver's door are opened when the vehicle is standing.
▷ The system has not detected objects for an extended period, e.g., on a road with very little traffic without road edge line markings.
▷ Radar sensor is soiled.
See also:
Hydroplaning
On wet or slushy roads, a wedge of water can
form between the tires and road surface.
This phenomenon is referred to as hydroplaning.
It is characterized by a partial or complete
loss of contact ...
Opening/closing the sliding visor
▷ Press the switch in the
desired
direction to the resistance
point and hold it there.
The sliding visor moves while
the switch is being held.
▷ Press the switch in the desired ...
Switching off
The system can be deactivated as follows:
▷ Press the button.
▷ Switch off the ignition. ...