Engaging the transmission position
▷ Transmission position P can only be disengaged if the engine is running and the brake pedal is pressed.
▷ With the vehicle stationary, press on the brake pedal before shifting out of P or N; otherwise, the shift command will not be executed: shift lock.
Depress the brake until you start driving
To prevent the vehicle from creeping after you select a driving position, maintain pressure on the brake pedal until you are ready to start.
Engaging D, R and N
Engaging D, R and N
Briefly push the selector lever in the desired direction, beyond a resistance point if necessary.
After releasing the selector lever, it returns to its center position.
Press unlock button, in order to:
▷ Engage R.
▷ Shift out of P.
Engaging P
Engaging P
Press button P.
See also:
Perfect handling: high-quality suspension technology, even weight
distribution and improved stability control
The new BMW 1-Series boasts best-in-class suspension technology, with a
double-joint cross-strut front axle with McPherson struts and sway bars, and a
five-link rear axle. The high aluminium conte ...
Tow fitting
The screw-in tow fitting should always be carried
in the vehicle. It can be screwed in at the
front or rear of the BMW.
It is stored with the tool kit under the cargo floor
cover in the cargo a ...
Pressure specifications
The tire inflation pressure table, refer to
page 238, contains all pressure specifications
for the specified tire sizes at the ambient temperature.
Pressure specifications apply to approved
tire ...