Engine stop

The engine is switched off automatically during a stop under the following conditions:

Manual transmission:

▷ Neutral is engaged and the clutch pedal is not pressed.

▷ The driver's safety belt is buckled or the driver's door is closed.

Automatic transmission:

▷ The selector lever is in transmission position D.

▷ Brake pedal remains depressed while the vehicle is stopped.

▷ The driver's safety belt is buckled or the driver's door is closed.

The air flow of the air conditioner is reduced when the engine is switched off.

Display in the instrument cluster

The READY display in the tachometer

The READY display in the tachometer signals that the Auto Start/Stop function is ready to start the engine automatically.

Note

The engine is not switched off automatically in the following situations:

▷ External temperature below approx. +37 ℉/ +3 ℃.

▷ The external temperature is high and automatic climate control is running.

▷ The passenger compartment has not yet been heated or cooled to the required level.

▷ The engine is not yet at operating temperature.

▷ The wheels are at a sharp angle or the steering wheel is being turned.

▷ After driving in reverse.

▷ Fogging of the windows when the automatic climate control is switched on.

▷ The vehicle battery charge is very low.

▷ The engine compartment lid is unlocked.

▷ The parking assistant is activated.

▷ Stop-and-go traffic.

▷ The transmission selector lever is in position N or S/M.

    See also:

    Customer Relations
    At a glance Contact Customer Relations for information on all aspects of your vehicle. Calling Customer Relations Vehicles not equipped with BMW Assist or TeleService 1. "BMW Assist" ...

    Switching on/off
    Press the button. On: the LED lights up. Off: the LED goes out. The system can issue warnings at speeds above approx. 40 mph/65 km/h. The state is stored for the remote control currentl ...

    Self-leveling suspension
    The concept The self-leveling suspension keeps the vehicle height and ground clearance constant. The height of the vehicle at the rear axle is maintained at a predefined level under all load co ...