Ignition off

Automatic transmission: press the Start/Stop button again, and do not press on the brake pedal at the same time.

Manual-shift transmission: press the Start/Stop button again, and do not press on the clutch pedal at the same time.

All indicator lamps in the instrument cluster go out.

To save battery power when the engine is off, switch off the ignition and any unnecessary electronic systems/power consumers.

Transmission position P with the ignition Transmission position P with the ignition off

When the ignition is switched off, position P is engaged automatically. When in an automatic car wash, for example, ensure that the ignition is not switched off accidentally.

Ignition automatically cuts off while the vehicle is stationary and the engine is stopped:

▷ During locking, also with the low beams activated.

▷ Shortly before the battery is discharged completely, so that the engine can still be started. This function is only available when the low beams are switched off.

▷ When opening and closing the driver door, if the driver's seat belt is unbuckled and the low beams are switched off.

▷ While the driver's seat belt is unbuckled, if the driver's door is open and the low beams are switched off.

When the ignition is switched off, by opening or closing the driver's door or unbuckling the driver's seat belt, the radio ready state remains active.

    See also:

    Notes
    The vehicle equipment does not include a spare tire. When using run-flat tires* or tire sealants, a tire does not need to be changed immediately in the event of pressure loss due to a flat tire ...

    With the Professional navigation system: Split screen
    General informationAdditional information, e.g. from the computer, can be displayed on the right side of the split screen. This information remains visible on the split screen even when you change ...

    The concept
    Adaptive Drive reduces the body roll which occurs when cornering quickly or during fast evasive maneuvers. In addition, Adaptive Drive reduces the steering angle requirement, improves the runn ...