Towing methods when towing other vehicles

Tow bar

The tow fittings used should be on the same side on both vehicles.

Should it prove impossible to avoid mounting the tow bar at an offset angle, please observe the following:

▷ Clearance and maneuvering capability will be sharply limited during cornering.

▷ The tow bar will generate lateral forces if it is attached offset.

Tow rope

When starting to tow the vehicle, make sure that the tow rope is taut.

To avoid jerking and the associated stresses on the vehicle components when towing, always use nylon ropes or nylon straps.

Only secure the tow rope on the tow fitting; Attaching the tow rope correctly
Only secure the tow rope on the tow fitting; otherwise, damage can occur when it is secured on other parts of the vehicle.◀

    See also:

    Operating principle
    With the ignition at radio readiness or beyond, , the following message is displayed on the Control Display: To hide the message: Press the controller. The main menu is displayed. The message i ...

    My Info
    Starting destination guidance 1. Select the desired message. 2. "Start guidance" or "Add as another destination" Dialing the number in the message Up to 4 phone numbers can b ...

    Important features in the engine compartment
    1 Washer fluid reservoir 2 Vehicle identification number 3 Jump-starting, negative terminal 4 Jump-starting, positive terminal 5 Coolant reservoir 6 Oil filler neck ...