Oil types for refilling

Notes

Do not use oil additives as these may No oil additives
Do not use oil additives as these may cause engine damage.◀

When selecting an engine oil, ensure that Viscosity classes of engine oils
When selecting an engine oil, ensure that the engine oil belongs to one of the viscosity classes SAE 0W-40, SAE 0W-30, SAE 5W-40, or SAE 5W-30, or malfunctions or engine damage may occur.◀

The engine oil quality is critical for the life of the engine.

Due to national regulations, some oil types are not available in every country.

Approved oil types

Further information on approved oil types can be

Further information on approved oil types can be obtained from the service center.

Alternative oil types

If the approved engine oils are not available, up to 1 US quart/liter of an oil with the following specification can be used:

Oil change

Oil change

An oil change should be carried out by the service center only.

Coolant

    See also:

    Engine oil temperature
    ► Cold engine: the pointer is at the low temperature end. Drive at moderate engine and vehicle speeds. ► Normal operating temperature: the pointer is in the middle or in the ...

    Display
    The driving distance or the time to the next service is displayed briefly after the ignition is switched on. The current service requirements can be read out from the remote control by the ...

    Pairing and connecting a device
    Pairing a device To avoid becoming distracted and posing an unnecessary hazard both to your own vehicle's occupants and to other road users, only pair the device while the vehicle is stationar ...