Decreasing speed
Repeatedly pull the lever to the resistance point or beyond, arrow 2, until the desired speed is displayed.
▷ Each time the lever is pulled to the resistance
point, the desired speed is decreased
by approx. 1 mph/1 km/h.
▷ Each time the lever is pulled beyond the resistance
point, the desired speed is reduced by up to 5 mph/10 km/h until the minimum
speed of 20 mph/30 km/h is achieved.
The system stores and maintains the speed.
See also:
Display on the Control Display
Switching on the backup camera via
iDrive
With PDC activated:
"Rear view camera"
The backup camera image is displayed. The setting
is stored for the remote control currently in
use ...
Functional requirements
The system must have been reset when the inflation
pressure was correct; otherwise, reliable
signaling of a flat tire is not ensured. Always use
wheels with TPM electronics to ensure that the
...
Indicator/warning lamps
The indicator lamp flashes: DSC
controls
the drive forces and brake forces.
The indicator lamp lights up: DSC has
failed. ...