Switching on wipers
Press the wiper lever upward, arrow 1.
The lever automatically returns to its initial position when released.
Normal wiper speed
Press up once.
The system switches to operation in the intermittent mode when the vehicle is stationary.
Fast wiper speed
Press up twice or press once beyond the resistance point.
The system switches to normal speed when the vehicle is stationary.
Switching off wipers or brief wipe
Press the wiper lever down, arrow 2.
The lever automatically returns to its initial position when released.
▷ Brief wipe: press down once.
▷ To switch off normal wipe: press down once.
▷ To switch off fast wipe: press down twice.
See also:
Radar sensor
Position
Radar sensor
Dirty or covered sensor
A dirty or covered sensor may hinder the detection
of vehicles.
If necessary, clean the radar sensor. Remove
layers of snow and ice carefull ...
Observe the following when
refueling
When refueling, insert the filler nozzle completely
into the filler pipe. Lifting up the fuel
pump nozzle during refueling causes:
▷ Premature pump shutoff.
▷ Reduced efficiency in t ...
Controls at a glance
Controls
1. Control Display
2. Controller with buttons
You can use the buttons to open the menus directly. The controller can be used to
select the menu items and create settings.
...