Switching on automatically
Select transmission position R with the engine running.
The backup camera image is displayed if the system was switched on via the iDrive.
See also:
In the cargo area
Open the cover on the right side trim.
Information on the fuse types and locations is
found on a separate sheet. ...
Programming
LED, arrow 1.
Memory buttons, arrow 2.
Fixed-code hand-held transmitters
1. Switch on the ignition.
2. Initial setup:
Press both outer buttons 1 and 3 for approx.
20 seconds until the L ...
Date
The settings are stored for the remote control
currently in use.
Setting the date
1. "Settings"
2. "Time/Date"
3. "Date:"
4. Turn the controller until the desired ...