TRACTION

Maximum traction on loose road surfaces. DTC Dynamic Traction Control is switched on. Driving stability is limited during acceleration and when driving in bends.

Activating TRACTION

TRACTION is displayed in the tachometer. Press the button.

TRACTION is displayed in the tachometer. The DSC indicator lamp in the instrument cluster lights up.

Deactivating TRACTION

TRACTION and the DSC indicator lamp Press the button again. TRACTION and the DSC indicator lamp go out.

Indicator/warning lamps

When TRACTION is activated, TRACTION is displayed in the tachometer.

TRACTION The indicator lamp lights up: TRACTION is activated.

    See also:

    System limits
    Top View cannot be used in the following situations: ▷ With a door open. ▷ With the trunk lid open. ▷ With an exterior mirror folded in. ▷ In poor light. A Check Control m ...

    Start/Stop button
    The concept Pressing the Start/Stop button switches the ignition on or off and starts the engine. The engine starts if the brake pedal is pressed when you press the Start/Stop button. ...

    Programming
    General information 1. Switch on the ignition. 2. Initial setup: Press and hold the left and right button on the interior rearview mirror simultaneously for approximately 20 seconds until the L ...