Headlamp courtesy delay feature

The low beams stay lit for a short while after the ignition is switched off, if the lamps are switched off and the headlamp flasher is switched on.

Setting the duration

1. "Settings" 2. "Lighting" 3. "Pathway light.: s" 4. Set the duration.

4. Set the duration.

4. Set the duration.

The setting is stored for the remote control currently in use.

    See also:

    Storing
    1. Switch on the ignition. 2. Set the desired position. 3. Press the button. The LED in the button lights up. 4. Press the desired button 1 or 2. The LED goes out. If the M button is pressed ...

    Setting the voice dialog
    You can set whether the system uses the standard dialog or a short version. In the short version of the voice dialog, the responses from the system are given in abbreviated form. On the Control Di ...

    Tire condition
    Inspect your tires frequently for tread wear, signs of damage and for foreign objects lodged in the tread. Check the tread depth. Minimum tread depthThe tread depth should not drop below 0.12 in/3 ...