Setting the clock

1. menu is Press the button. The main menu is displayed.

2. Turn the controller until "Settings" is highlighted, and then press the controller.

3. If necessary, move the controller to the left

3. If necessary, move the controller to the left to display "Time/Date".

4. Turn the controller until "Time/Date" is highlighted, and then press the controller.

5. Turn the controller until "Time:" is highlighted,

5. Turn the controller until "Time:" is highlighted, and then press the controller.

6. Turn the controller to set the hours and

6. Turn the controller to set the hours and press the controller.

7. Turn the controller to set the minutes and press the controller.

    See also:

    Radar sensors
    Radar sensors The radar sensors are located under the rear bumper. The system may not be fully functional in the following situations: ▷ Dirty or icy bumper. ▷ Stickers on the ...

    Activating
    1. Turn the light switch to or . 2. Press the button on the turn signal lever, arrow. The indicator lamp in the instrument cluster lights up. When the lights are switched on, the high b ...

    DTMF suffix dialing
    DTMF suffix dialing can be used for gaining access to network services or for controlling devices, e.g., to make a remote inquiry of an answering machine. The DTMF code is needed for this purp ...