Socket for OBD OnboardDiagnosis

Position

There is an OBD socket on the driver's side for checking the primary components in the vehicle emissions.

Emissions

► The warning lamp lights up:

► The warning lamp lights up:

Emissions are deteriorating. Have the vehicle checked as soon as possible.

indicates Canadian model: warning light indicates the engine symbol.

► The warning lamp flashes under certain circumstances:

This indicates that there is excessive misfiring in the engine.

Reduce the vehicle speed and have the system checked immediately; otherwise, serious engine misfiring within a brief period can seriously damage emission control components, in particular the catalytic converter.

Fuel cap

The indicator lamp lights up.

If the fuel cap is not properly tightened, the OBD system may conclude that fuel vapor is escaping. If the cap is then tightened, the display should go out in a short time.

    See also:

    Low tire pressure message
    The yellow warning lamp lights up. A Check Control message is displayed. ▷ There is a flat tire or a major loss in tire inflation pressure. ▷ The system was not reset after a whee ...

    General information
    Switch position: 0, If the driver door is opened with the ignition switched off, the exterior lighting is automatically switched off at these switch settings: ...

    Switching off automatically
    The system switches off and the LED goes out: ▷ After approx. 165 ft/50 m when driving forward. ▷ After approx. 22 mph/35 km/h when driving forward. Switch on the system again if nece ...