Message when the system was notreset
A Check Control message is displayed.
The system detected a wheel change but was not reset.
Warnings regarding the current tire inflation pressure are not reliable.
Check the tire inflation pressure and reset the system.
See also:
Fuses
Notes
Replacing fuses
Never attempt to repair a blown fuse and
do not replace a defective fuse with a substitute
of another color or amperage rating; this could
lead to a circuit overload, ul ...
In the cargo area
Open the cover on the right side trim.
Information on the fuse types and locations is
found on a separate sheet. ...
Automatic-Transmission
Switching off the engine
1. Engage transmission position P with the vehicle
stopped.
2. Press the Start/Stop button.
The engine is switched off.
The radio ready state is switched on.
3. Set the ...