Strength of the driver's and frontpassenger airbag
The strength with which the driver's and front passenger airbags are triggered depends on the position of the driver's and front passenger seats.
To maintain the accuracy of this function over the long-term, calibrate the front seats when a corresponding message appears on the Control Display.
Calibrating the front seats
A corresponding message appears on the Control Display.
1. Move the respective seat forward all the
way.
2. Move the respective seat forward again. It
moves forward briefly.
3. Readjust the seat to the desired position.
The calibration procedure is completed when the message on the Control Display disappears.
If the message continues to be displayed, repeat the calibration.
If the message does not disappear after a repeat calibration, have the system checked as soon as possible.
Unobstructed area of movement
Ensure that the area of movement of the
seats is unobstructed to avoid personal injury or
damage to objects.◄
See also:
Vehicle equipment
This Owner's Manual describes all models and
all standard, country-specific and optional
equipment that is offered in the model series.
Therefore, in this Owner's Manual, equipment is
also descr ...
Storing the position
The current position can be stored in the address
book.
1. "Navigation"
2. Open "Options".
3. "Store position as contact" or "Add position
to contact"
...
Self-leveling suspension
The concept
The self-leveling suspension keeps the vehicle
height and ground clearance constant. The
height of the vehicle at the rear axle is maintained
at a predefined level under all load co ...