Adaptive light control

The concept

Adaptive light control is a variable headlamp control system that enables dynamic illumination of the road surface.

Depending on the steering angle and other parameters, the light from the headlamp follows the course of the road.

Activating

Switch position ignition switched with the ignition switched on.

The turning lamps are automatically switched on depending on the steering angle or the use of turn signals.

To avoid blinding oncoming traffic, the Adaptive Light Control does not swivel to the driver's side when the vehicle is at a standstill.

When driving in reverse, only the turning lamp is active.

Self-leveling headlights

The self-leveling headlights feature adapts the light distribution to the contours of the road.

The light distribution is lowered on hilltops to avoid blinding oncoming traffic and tilted in depressions to increase visibility.

Malfunction

A Check Control message is displayed.

Adaptive light control is malfunctioning or has failed. Have the system checked as soon as possible.

    See also:

    Automatic-Transmission
    Switching off the engine 1. Engage transmission position P with the vehicle stopped. 2. Press the Start/Stop button. The engine is switched off. The radio ready state is switched on. 3. Set the ...

    Configuring ECO PRO
    1. "Settings" 2. "Driving mode" 3. "Configure ECO PRO" 4. Configure the program. ECO PRO Tip ▷ "ECO PRO limit:": Set ECO Pro speed at which an ECO ...

    Remove attached partsfollowing use
    Remove auxiliary mirrors, roof or rear luggage racks which are no longer required following use. Attached parts on the vehicle impair the aerodynamics and increase the fuel consumption. ...