Speed limit

Display of a speed limit which, when reached, should cause a warning to be issued.

The warning is repeated if the vehicle speed drops below the set speed limit once by at least 3 mph/5 km/h.

Displaying, setting or changing the limit

1. "Settings"
2. "Speed"
3. "Warning at:"

4. Turn the controller until the desired limit is

4. Turn the controller until the desired limit is displayed.
5. Press the controller.

The speed limit is stored.

Activating/deactivating the limit

1. "Settings"
2. "Speed"
3. "Warning"
4. Press the controller.

Applying your current speed as the limit

1. "Settings"
2. "Speed"
3. "Select current speed"
4. Press the controller.

The current vehicle speed is stored as the limit.

    See also:

    Radio ready state
    Activate radio ready state: When the ignition is switched off: press ON/ OFF button on the radio. When the engine is running: press START/ STOP button. Some electronic systems/power con ...

    headlamp flasher
    1.  High beams 2. Headlamp flasher 3.  Turn signal Using turn signalsPress the lever beyond the resistance point. To turn off manually, press the lever to the resistance point. Unus ...

    Radar sensor
    Position Radar sensor Dirty or covered sensor A dirty or covered sensor may hinder the detection of vehicles. If necessary, clean the radar sensor. Remove layers of snow and ice carefull ...