Initializing after a power failure

After a power failure during the opening or closing process, the roof can only be operated to a limited extent.

Initializing the system

The system can be initialized when the vehicle is stationary and the engine is running.

During the initialization, the roof closes without pinch protection.

Monitor the closing process and make Danger of pinching
Monitor the closing process and make sure that the closing path of the glass sunroof is clear; otherwise, injuries may result.◄

until the initialization is complete: Press the switch up and hold it until the initialization is complete:

► Initialization begins within 15 seconds and is completed when the sunroof and sliding visor are completely closed.

► The roof closes without pinch protection.

    See also:

    Automatic tailgate operation
    Adjusting the opening height You can set how far the tailgate should open. Adjusting the opening height When adjusting the opening height, ensure that there is a clearance of at least 4 in/10 cm ...

    Activating/deactivating the limit
    1. "Settings" 2. "Speed" 3. "Warning" ...

    Signal tones
    When approaching an object, an intermittent tone is sounded that indicates the position of the object. For example, if an object is detected to the left rear of the vehicle, a signal tone sounds ...