AM/FM station

Selecting a station

1. "Radio"
2. "FM" or "AM"
3. Select the desired station

All saved stations are stored for the remote control

All saved stations are stored for the remote control currently in use.

Changing the station

Storing a station Press the button.

Storing a station

1. "Radio"
2. "FM" or "AM"
3. Highlight the desired station.

4. Press the controller for an extended period.

4. Press the controller for an extended period.
5. Select the desired memory location.

The stations are stored for the remote control currently in use.

The stations can also be stored on the programmable memory buttons

Selecting a station manually

Station selection via the frequency.

1. "Radio"
2. "FM" or "AM"
3. "Manual"
4. To select the frequency: turn the controller.

To store the station: press the controller for an

To store the station: press the controller for an extended period.

RDS

RDS broadcasts additional information, such as the station name, in the FM wave band.

Switching the RDS on/off

1. "Radio"
2. "FM"
3. "Options" Open.
4. "RDS"

The setting is stored for the remote control currently

The setting is stored for the remote control currently in use.

HD Radio reception

Many stations broadcast both analog and digital signals.

License conditions HD Radio technology manufactured under license from iBiquity Digital Corp. U. S. and Foreign Patents. HD Radio and the HD and HD Radio logos are proprietary trademarks of iBiquity Digital Corp.

Activating/deactivating digital radio reception

1. "Radio"
2. "FM" or "AM"
3. Open "Options".
4. "HD Radio Reception"

The setting is stored for the remote control currently in use.

status line This symbol is displayed in the status line when the audio signal is digital.

In areas in which the station is not continuously received in digital mode, the playback switches between analog and digital reception. Due to time delayed broadcasting, there may be repetitions or interruptions. In this case, switch off digital radio reception.

Displaying additional information

Some stations broadcast additional information on the current track, such as the name of the artist.

1. Select the desired station.
2. Open "Options".
3. "Station info"

Selecting a substation

main station also This symbol indicates that a main station also broadcasts additional substations. The station name of the main station ends in HD1. Station names of the substations end in HD2, HD3, etc.

1. Select the desired station.
2. Press the controller.
3. Select the substation.

When reception is poor, the substation is muted for several seconds. If reception is interrupted for an extended period, it switches back to the main station.

    See also:

    Automatic headlamp control
    Switch position : the low beams are switched on and off automatically, e.g., in tunnels, in twilight or if there is precipitation. The LED next to the symbol lights up. A blue sky with the s ...

    Navigation
    This chapter contains various examples of how the navigation system can guide you reliably to your destination. ...

    Releasing the parking brake manually
    In the event of an electrical power loss or electrical malfunction, you can release the parking brake manually. Secure the vehicle against rolling Before releasing the parking brake manually, ...